Problems creating Voice applications on Cisco 2851

Unanswered Question
Jul 5th, 2012
User Badges:

Hello everyone, i'm having some issues when loading a voice application on our 2851 (IOS 151-3.T4).

I've made an application that loads multiple scripts depending on some schedules. When i have to load multiple applications at the same time i encounter the following issue:

My program opens 2 sockets, for each of them loads a service application specifying the parameters for each application. when i use the show run command i find some of the parameter specified in the first application to be under the second one (and missing from the first one) is there any workaround for this problem? Is easy to reproduce it by opening 2 telenet session, start the configuration of 2 applications, when you write some parameter in the first declared application, if you look under the show run you find these parameter under the other application.


Thank you in advance.


Alessandro.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Sun, 07/08/2012 - 15:51
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Routers are supposed to be configured by only one session, not multiple ones.

Actions

This Discussion