×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Dial Plan problem

Answered Question
Jul 13th, 2012
User Badges:

I have a problem implementing my dial plan on CUCM 8.6.


I have a translation pattern 049.1XXX (Predot) for internal calls . When i try to call an external number 0491509352 i receive a message from CUCM saying thet the call cannot be completed and the call is not routed to the gateway. I know it's normal because there is no extension 1509 on CUCM.

How can i resolve this problem without adding any digit?


Thank you in advance

Correct Answer by ronpatel about 5 years 1 month ago

HI


Please de select Urgent Priority in  Translation Pattern Configuration. This will resolve your issue.


Regards

Ronak Patel


Rate helpful posts.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
ronpatel Fri, 07/13/2012 - 02:49
User Badges:
  • Blue, 1500 points or more

Hi,


Do you have route pattern for this number 0491509352?


Regards

Ronak Patel

nikshah Fri, 07/13/2012 - 03:20
User Badges:
  • Cisco Employee,

Hi Youssef,


Still a little unclear as to what are your requirements, can you trace the call flow something like this


ip phone-->> TP-->> CUCM-->> Gw etc... and let us know what you are looking to achieve.


Regards

Niket

Youssef Aoufi Fri, 07/13/2012 - 03:28
User Badges:

i have an internal extensions 1000 , 1001 ... 1010 in Germany Partition.

Ip phones on other partitions (usa, france etc...) shoul call 04910XX to reach this phones. that's why i created a translation pattern 049.1XXX to reach them from other regions.

At the same time , i want to call a PSTN number : 0491509352 that cannot be routed because it matches the translation pattern and not the route pattern 04XXXXXXXX .

I don't want to add an additional digit .


Thank you in advance

Correct Answer
ronpatel Fri, 07/13/2012 - 03:34
User Badges:
  • Blue, 1500 points or more

HI


Please de select Urgent Priority in  Translation Pattern Configuration. This will resolve your issue.


Regards

Ronak Patel


Rate helpful posts.

Actions

This Discussion

Related Content