07-13-2012 02:40 AM - edited 03-16-2019 12:10 PM
I have a problem implementing my dial plan on CUCM 8.6.
I have a translation pattern 049.1XXX (Predot) for internal calls . When i try to call an external number 0491509352 i receive a message from CUCM saying thet the call cannot be completed and the call is not routed to the gateway. I know it's normal because there is no extension 1509 on CUCM.
How can i resolve this problem without adding any digit?
Thank you in advance
Solved! Go to Solution.
07-13-2012 03:34 AM
HI
Please de select Translation Pattern Configuration. This will resolve your issue.
Regards
Ronak Patel
Rate helpful posts.
07-13-2012 02:49 AM
Hi,
Do you have route pattern for this number 0491509352?
Regards
Ronak Patel
07-13-2012 03:00 AM
Yes of course 04XXXXXXXX and the CSS can reach this pattern
07-13-2012 03:20 AM
Hi Youssef,
Still a little unclear as to what are your requirements, can you trace the call flow something like this
ip phone-->> TP-->> CUCM-->> Gw etc... and let us know what you are looking to achieve.
Regards
Niket
07-13-2012 03:28 AM
i have an internal extensions 1000 , 1001 ... 1010 in Germany Partition.
Ip phones on other partitions (usa, france etc...) shoul call 04910XX to reach this phones. that's why i created a translation pattern 049.1XXX to reach them from other regions.
At the same time , i want to call a PSTN number : 0491509352 that cannot be routed because it matches the translation pattern and not the route pattern 04XXXXXXXX .
I don't want to add an additional digit .
Thank you in advance
07-13-2012 03:34 AM
HI
Please de select Translation Pattern Configuration. This will resolve your issue.
Regards
Ronak Patel
Rate helpful posts.
07-14-2012 02:50 PM
Thanks Ronak,
That did the trick!!
regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: