×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Nexus 3064 switch: Can't get MAC addresses through SNMP

Unanswered Question
Jul 13th, 2012
User Badges:

Hello Everyone!


I'm seeing an issue in our Nexus 3064 switch where we can't get the MAC address table using SNMP. At the same time, I can see MAC addresses of all the ports from the switch command line (show mac address-table). I've verified that SNMP is enabled and I can fetch other switch information (such as VLANs) using SNMP.


I did an SNMP walk to get the mac (

snmpwalk -v2c -c <communityString>@<VlanID> <ManagementIP> 1.3.6.1.2.1.17.4.3.1), and it didnt return anything.


Could any of you please let me know what can be potentially wrong here? Really appreciate your help.


Thanks for your time!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
phiharri Fri, 09/07/2012 - 06:31
User Badges:
  • Silver, 250 points or more

Greetings Vipins,


This could be caused by CSCto56055 "not getting any value for dot1dtpFdbTable objects", resolved in 5.0(3)U1(2) and later releases.


Kind Regards,

/Phil

Actions

This Discussion

Related Content