×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Multicast: Set s,g cache timeout

Unanswered Question
Jul 15th, 2012
User Badges:

Device:  asr9k

Software: 4.2.1


show mrib route....

.....

(11.0.3.18,225.0.15.175) RPF nbr: 11.0.3.18 Flags:

  Up: 13:16:35

  Incoming Interface List

    GigabitEthernet0/1/0/10.100 Flags: A, Up: 13:16:35


(11.0.3.18,225.0.15.176) RPF nbr: 11.0.3.18 Flags:

  Up: 13:16:35

  Incoming Interface List

    GigabitEthernet0/1/0/10.100 Flags: A, Up: 13:16:35


(11.0.3.18,225.0.15.177) RPF nbr: 11.0.3.18 Flags:

  Up: 13:16:35

  Incoming Interface List

    GigabitEthernet0/1/0/10.100 Flags: A, Up: 13:16:35

....


I was looking through the ios-xr documentation to see if there was a way to set the cache timeout for an S,G entry.  These entries, its been 8+ hours since any traffic was sent to them and there are no longer any olist of interest.


Best regards and thanks,

John

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content