×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Is it possible to restrict which voicemail ports a dn can use

Unanswered Question
Jul 17th, 2012
User Badges:

CUCM 8.5 Unity Connection 8.5

We have some fifty sites on our system, some of which are high users of Unity for transfers etc.

Is it possible to restrict a specific number to only use certain voicemail ports, thus preventing one number taking all the capacity?          

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Tue, 07/17/2012 - 08:33
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

No, you reach all the VM ports via the VM pilot and you do not control which ports a DN can reach.

You would need to create a separate VM pilot, line group, etc and then assign some of the ports from your current integration to that profile in order to achieve this.


HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

Chris Deren Tue, 07/17/2012 - 08:33
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Unfortunately not, the ports are allocated to phone system integration. Your only possible solution i can think of would be to use SCCP integration and assign different integrations on CUCM side with dedicated profile and pilot pointing to seperate port groups, but that might get messy in long term.


HTH,


Chris

Actions

This Discussion

Related Content