×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ESW 520 8-port - firmware upgrade

Answered Question
Jul 21st, 2012
User Badges:

Hi,


We have a ESW 520 8-port currently on firmware version 2.1.1.19 (boot version 1.0.0.07, VID V01) - Serial number CBT15100AN2


The latest firmware version is 2.1.1.21, which we downloaded and via Maintenance, Software Upgrade, via HTTP performed an upgrade to this latest version - the upgrade appears to complete, logs show successful however when we restart the switch it still shows as 2.1.1.19 . Very strange!


Can someone please advise how to get the upgrade to successfully apply?


Kindest regards,

Dale. 

Correct Answer by Davidwagman1 about 5 years 4 weeks ago

Hi Dale,


Did you change the active firmware image to the new version before restarting? (Maintenance -> File Management -> Active Image)


Best,

David


Please rate helpful posts and identify correct answers.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Davidwagman1 Sat, 07/21/2012 - 16:02
User Badges:
  • Gold, 750 points or more

Hi Dale,


Did you change the active firmware image to the new version before restarting? (Maintenance -> File Management -> Active Image)


Best,

David


Please rate helpful posts and identify correct answers.

dale_bentley Sat, 07/21/2012 - 16:09
User Badges:

David,


Thanks for such a question reply - I had tried that and after reboot still shows as 2.1.1.19


I decided to install the firmware upgarde again, change the active firmware to 2.1.1.21 again, restarted and this time it held.


Thank you for your assistance, all resolved.


Cheers,

Dale.

Davidwagman1 Sat, 07/21/2012 - 16:12
User Badges:
  • Gold, 750 points or more

Dale,


Glad to hear its all resolved


Best,

David


Please rate helpful posts and identify correct answers.



Actions

This Discussion

Related Content