×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

reconfig of 3750 g

Answered Question
Jul 23rd, 2012
User Badges:

Can someone explain how to access (to reconfig) a 3750g that was configured to use a radius server for authentication?

We just installed a new stack and will be using the old switches for other tasks. It continues to show the radius as not responding, but as being marked alive. Thanks.

Correct Answer by Richard Burts about 5 years 3 weeks ago

Chris


It sounds like you are looking for how to do password recovery on the switch so that you can bypass the existing config. Can you confirm that this is what you are looking for?


HTH


Rick


Sent from Cisco Technical Support iPad App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Richard Burts Mon, 07/23/2012 - 19:26
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Chris


It sounds like you are looking for how to do password recovery on the switch so that you can bypass the existing config. Can you confirm that this is what you are looking for?


HTH


Rick


Sent from Cisco Technical Support iPad App

Ccrawford13 Tue, 07/24/2012 - 07:11
User Badges:

You were correct. The loop while booting was irregular, and I thought I could "break in" without using recovery. I was wrong.

Thanks for the response!

Richard Burts Tue, 07/24/2012 - 08:30
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Chris


I am glad that you got it worked out and that my response was helpful. Thank you for using the rating system to indicate that the question was answered. It makes the forum more useful when people can read a question and can know that an answer was found. Your marking has contributed to this process.


HTH


Rick

Actions

This Discussion

Related Content