Can't ping anything when IPSEC VPN'ed in through SA520

Unanswered Question
Jul 24th, 2012

I'm currently working with a setup where the SA520 is the outward facing device, performing NAT with a subnet of 192.168.1.x, with a UC540's WAN port connected to one of the LAN ports on the SA520. The UC540 is also performing NAT with a subnet of 192.168.10.x. THere is a SF300-24P plugged in to the expansion port on the UC540. While plugged in directly to any of the devices, I have static routes set so that I can ping any of the devices on these subnets. This has been tested to work.

I am able to IPSEC VPN in to SA520, with the VPN pool on the 192.168.12.x subnet. Once connected I can NOT ping any device on any subnet, nor any websites. Do I need to add a static route or VPN policy somewhere to allow connections from the 192.168.12.x subnet to the other subnets?

Thanks in advance for any help.

-Chris            

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)

Actions

Login or Register to take actions

This Discussion

Posted July 24, 2012 at 10:18 AM
Stats:
Replies:0 Avg. Rating:
Views:679 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard