×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Aironet 3600e configuration

Unanswered Question
Jul 25th, 2012
User Badges:

Hello folks,


Does anyone know how I can configure the Aironet 3600e by Cisco without a WAN Controller. I know it's a controller based AP but I bought it in preparation for my new WiFi Network Design as I'm planning to deploy these APs together with a controller but at this stage all I need is just basic config so that I can see how good it will work in the environment I want to implement it. So I was wondering if there is some kind of default IP and Admin/ Password as I could not find the info on Cisco's website.


Thanks!


Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Wed, 07/25/2012 - 15:40
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Currently, the 3600 does not and cannot operate in autonomous mode.


A WLC (running at least 7.2.103.0) is required.

BigBee117 Thu, 07/26/2012 - 08:50
User Badges:

Snap!!!!!!!! I don't know what to do now cause I wouldn't prefer to get the controller before I figure out how things work with this AP; The WLC is a big investment so I was hoping there would be a way to configure the AP without the controller just for testing.  

Leo Laohoo Thu, 07/26/2012 - 15:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

How "friendly" are you with your Cisco account manager/sales engineer?


I'm not talking about your authorized Cisco reseller.


Talk to Cisco and ask to borrow an evaluation WLC5508 or 2504. 

BigBee117 Tue, 07/31/2012 - 08:25
User Badges:

Hey leolaohoo,


I contacted Cisco about this issue and I was told that in order to get TAC  technical support and troubleshooting or to get assistance configuring  my device, I would need to purchase a SmartNet contract.


I don't know any Cisco account manager or engineer...

I didn't know borrowing was possible. What's the procedure?


I appreciate your help.

Actions

This Discussion

Related Content