×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

DMVPN with client based Remote access VPN

Answered Question
Jul 29th, 2012
User Badges:

Hi all


we have DMVPN deployed to connect our remote location now i want to configure remote access vpn also with DMVPN tunnel so if somehow our DMVPN tunnel goes down we can connect to the router through client based remote access vpn from anywhere ................ i want to experts to shed some light on it is this possible or what will be technical challenges i have to face in this regard.


Thanks

Salman Jamshed

Correct Answer by Julio Carvajal about 5 years 3 weeks ago

Hello Salman,


This is 100 % possible, there will be no harm in having both set up on your router.


In fact as you said it will provide an extra layer of redundancy if by any chance the DMVPN tunnel goes down.


That being said you can go ahead and do it It's a safe move


Julio

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Julio Carvajal Sun, 07/29/2012 - 22:56
User Badges:
  • Purple, 4500 points or more

Hello Salman,


This is 100 % possible, there will be no harm in having both set up on your router.


In fact as you said it will provide an extra layer of redundancy if by any chance the DMVPN tunnel goes down.


That being said you can go ahead and do it It's a safe move


Julio

Actions

This Discussion