×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Problem registering IP Phones 6945

Unanswered Question
Jul 31st, 2012
User Badges:

I was installing Cisco IP Phones 7945 and 6945 using CUCME 9.0 in a 2921 router. The problem is that the 6945 phones don´t register in CUCME; i have tried with SCCP and SIP with the same results. The firmware that the phones are using is 9-2-1-0. The IOS of the router is 15-2-4 universal. The 7945 phones register with no problems; the problem is only with the 6945 phones.               

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Tue, 07/31/2012 - 14:09
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You can take "debug ephone register" with "term mon" to see what's happening.

Tecnologia Aplicada Wed, 08/01/2012 - 07:45
User Badges:

I issue the debug command and term monitor in the router. When I plug the phone, it doesn´t give me any result.

paolo bevilacqua Wed, 08/01/2012 - 09:55
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Then you can take debug tftp events to see what happens before registration.

Actions

This Discussion

Related Content