07-31-2012 02:03 PM - edited 03-16-2019 12:28 PM
I was installing Cisco IP Phones 7945 and 6945 using CUCME 9.0 in a 2921 router. The problem is that the 6945 phones don´t register in CUCME; i have tried with SCCP and SIP with the same results. The firmware that the phones are using is 9-2-1-0. The IOS of the router is 15-2-4 universal. The 7945 phones register with no problems; the problem is only with the 6945 phones.
07-31-2012 02:09 PM
You can take "debug ephone register" with "term mon" to see what's happening.
08-01-2012 07:45 AM
I issue the debug command and term monitor in the router. When I plug the phone, it doesn´t give me any result.
08-01-2012 09:55 AM
Then you can take debug tftp events to see what happens before registration.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide