Hello Eisada,
There is a backdoor CLI for the SGE/SFE2000/2010 switches. However, the feature is unsupported and not recommended to use. Additionally, if you enable the CLI view on the console, there is not an exit command to go back to the menu driven supported configuration.
To access this configuration you can telnet to the switch (if you enable Telnet under the Bonjour tab) or console the switch. Authenticate as you normally would.
Press ctrl+z at the same time then type LCLI and hit enter. This will toggle the CLI and a 'normal login'.
-Tom
-Tom
Please mark answered for helpful posts
http://blogs.cisco.com/smallbusiness/
