RV042G V01 NAT/PAT

Unanswered Question
Aug 2nd, 2012

Hi,

I need to convert an IOS router configuration to a RV042G V01. Is there a way to implement these IOS 12.2 based commands below?

ip nat pool InternetInterface 1.1.1.1 1.1.1.1 netmask 255.255.255.252

ip nat inside source list OutboundInternetTrafficToTranslate interface Ethernet0/1 overload

ip nat inside source route-map nonat pool InternetInterface overload

ip nat inside source static tcp 192.168.1.60 143 interface Ethernet0/1 143

ip nat inside source static tcp 192.168.1.60 8000 interface Ethernet0/1 8000

ip nat inside source static tcp 192.168.1.60 25 interface Ethernet0/1 25

ip nat inside source static tcp 192.168.1.25 5631 208.a.b.c 5631 extendable

ip nat inside source static tcp 192.168.1.25 5632 208.a.b.c 5632 extendable

ip nat inside source static udp 192.168.1.25 5631 208.a.b.c 5631 extendable

ip nat inside source static udp 192.168.1.25 5632 208.a.b.c 5632 extendable

Since I normally configure enterprise products with CLI, I'm ineffective with this GUI and not even sure what this unit can do (PAT?).

Any help is appreciated. Thanks.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)

Actions

Login or Register to take actions

This Discussion

Posted August 2, 2012 at 8:00 PM
Stats:
Replies:0 Avg. Rating:
Views:671 Votes:0
Shares:0
Tags: nat, rv042
+

Related Content

Discussions Leaderboard

Rank Username Points
1 1,091
2 369
3 181
4 83
5 80
Rank Username Points
5
5