×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Aaron Harrison Fri, 08/03/2012 - 00:01
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015

Hi


You haven't specified whether you are using CUCM, CME, H323, MGCP or anything else that might help diagnose your issue...


However, it's most common to get this issue on H.323 based systems. Take a look at this document: http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml#ringback_pstn


Aaron

Actions

This Discussion