08-02-2012 10:36 PM - edited 03-21-2019 06:06 AM
Hi,
I have a problem with a SPA525G2. It doesn't register on the UC540 if its IP is from another range than the UC540. on the phone
ex: spa525 (10.10)----Router-----Unity (20.1).
if the phone is plugged directly into the unity, it works without problems.
UC540W-BRI-K9
SPA525 Firmware: 7.5.2a
IOS:15.1(4)M4b
CME: 8.6
Thanks.
Cristian
08-03-2012 09:53 AM
Maybe you need to configure option 150 in DHCp at the remote relocation.
Note: UC500 is not Unity.
08-04-2012 10:56 PM
Hi Paolo,
150 is configured, the phone gets the SEP file but then remains in connecting...and nothing happens.
if I turn on the VPN, it works without problems.
Thanks.
08-05-2012 12:06 AM
Hi Cristian,
Is the SPA525 local to the UC or is it a remote phone?
Thank you,
Jason Nickle
08-05-2012 11:14 PM
Hi Jason,
yes, it's a simple lab setup.
spa525 --- router --- uc540
Thanks
Cristian
08-16-2012 12:58 AM
it worked over vpn so we can close the thread.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: