×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

EZVPN : tunnels are up but cannot ping??

Unanswered Question
Aug 3rd, 2012
User Badges:

Dear Team,


This is regarding EZVPN, cisco router as a client and server. Please find the attached configs and show ouputs.


I am not able to ping from R2 to R1s loopback interface. Please help.


R1 and R2 are directly connected.


Thank You,

Abhisar.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Karsten Iwen Fri, 08/03/2012 - 01:30
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Firewalling, VPN

You need to add routing to the remote networks on both devices.

abhisar patil Sat, 08/04/2012 - 07:09
User Badges:

Dear Karsten,


Thank you for your reply.


If I add routes for remote networks, the remote networks are directly available and traffic will not pass through VPN.


Thank You,

Abhisar

Karsten Iwen Sat, 08/04/2012 - 10:41
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Firewalling, VPN

No, that's not the way VPNs work. Without the static route the router doesn't even know that the packet has to be sent to the ezvpn-enabled outside-interface (if we are looking at the remote).


Sent from Cisco Technical Support iPad App

Actions

This Discussion

Related Content