×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Re-route the call

Answered Question
Aug 8th, 2012
User Badges:

Anyone have any idea how to reroute the PSTN call from 1 cluster to another cluster's vg (MGCP)?


Phone A registered to Cluster A.

VG B registered to Cluster B via MGCP.

Cluster A & Cluster B is running as intercluster trunk without Gatekeeper.


Is it possible the phone A make the PSTN call via Cluster B's VG?


thank you.

Correct Answer by Chris Deren about 5 years 1 week ago

Sure, simply build route pattern pointing to the ICT and then on the other cluster ensure the CSS assigned to the trunk has access to the GW via either direct access to outbound RPs or intermediate translation patterns.


HTH,


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Chris Deren Wed, 08/08/2012 - 12:25
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Sure, simply build route pattern pointing to the ICT and then on the other cluster ensure the CSS assigned to the trunk has access to the GW via either direct access to outbound RPs or intermediate translation patterns.


HTH,


Chris

Jaime Valencia Wed, 08/08/2012 - 12:25
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Yes, just make sure whatever you're sending via the ICT is routable in cluster B and that the inbound CSS from ICT on B has the CSS that allows for outbound calls.


HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

Actions

This Discussion