3945 Ethernet Switch Module

Spagsterj · ‎08-09-2012

Hello,

I have a Ethernet module (SM-ES3G-16-P) installed in a 3945 router and noticed during first boot no licenses are active at all. I would assume at a mimimum ipbase would be active.

With this module, does static routing work with just ipbase?

Example:

interface g0/1

no switchport

ip addr 192.168.254.2 255.255.255.0

!

int vlan 1

ip addr 172.16.1.2 255.255.255.252

!

ip route 0.0.0.0.0 0.0.0.0 172.16.1.1

switch#show license

Index 1 Feature: advipservices

Period left: 0 minute 0 second

Index 2 Feature: ipservices

Period left: 8 weeks 4 days

License Type: Evaluation

License State: Active, Not in Use, EULA not accepted

License Priority: None

License Count: Non-Counted

Index 3 Feature: ipbase

Period left: 0 minute 0 second

Thanks!

Alessio Andreoli · ‎08-09-2012

Yes it does. Static routing will work with ipbase.

Alessio

Spagsterj · ‎08-09-2012

Is there a maximum of static routes?

Sent from Cisco Technical Support iPhone App

Peter Paluch · ‎08-12-2012

Hi,

I do not recall seeing any artificial limit on the count of static routes with IP Base on 3945 routers. I believe there is no practical limit.

Best regards,

Peter

Wilson Gabriel Veliz Plua · ‎12-05-2013

Hello Spagster

The configuration taht you post is all from de SM. also can you help me with the steps to do the initial configuration f the SM

Thanks