3945 Ethernet Switch Module

Unanswered Question
Aug 9th, 2012
User Badges:


I have a Ethernet module (SM-ES3G-16-P) installed in a 3945 router and noticed during first boot no licenses are active at all. I would assume at a mimimum ipbase would be active.

With this module, does static routing work with just ipbase?


interface g0/1

no switchport

ip addr


int vlan 1

ip addr


ip route

switch#show license

Index 1 Feature: advipservices

        Period left: 0  minute  0  second

Index 2 Feature: ipservices

        Period left: 8  weeks 4  days

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

        License Priority: None

        License Count: Non-Counted

Index 3 Feature: ipbase

        Period left: 0  minute  0  second


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Alessio Andreoli Thu, 08/09/2012 - 09:26
User Badges:
  • Silver, 250 points or more

Yes it does. Static routing will work with ipbase.


Spagsterj Thu, 08/09/2012 - 16:50
User Badges:

Is there a maximum of static routes?

Sent from Cisco Technical Support iPhone App

Peter Paluch Sun, 08/12/2012 - 07:09
User Badges:
  • Cisco Employee,


I do not recall seeing any artificial limit on the count of static routes with IP Base on 3945 routers. I believe there is no practical limit.

Best regards,


Wilson Gabriel ... Thu, 12/05/2013 - 12:10
User Badges:

Hello  Spagster

The configuration taht you post is all from de SM. also can you help me with the steps to do the initial configuration f the SM



This Discussion