LISP runs great in GNS3/dynamips

Unanswered Question
Aug 10th, 2012
User Badges:

So if you're interested in testing LISP, download the latest engineering release from lisp.cisco.com for the 7200 (contract required, of course) and give it a try.  I've been very happy with LISP and after extensive testing in GNS3 have been running LISP VPN in production now for months as an alternative to DMVPN.  I can post some configs if anyone is interested, although it is very easy to configure.


HTH,

Matt

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
danielkuhl Mon, 09/24/2012 - 01:26
User Badges:

Hi Matt,


which IOS version do you use with GNS3 to run lisp on the 7200?


regards

Daniel

sergeybondarenko Fri, 03/15/2013 - 01:11
User Badges:

Hello Matt

Can you share with me the GNS3 configuration for LISP?

Also I shall be thankful for IOS.


Now I design a networking solution for a two data centers and I must ensure seamless mobility for a virtual machines. I would like to use LISP for the task.


Later I can provide you the results of the proof test.

danielkuhl Fri, 03/15/2013 - 01:55
User Badges:

Hi Sergey,


I recommend to use c7200-adventerprisek9-mz.152-4.XB10 for GNS3. I tested it with a LISP+GETVPN solution and it works great.


Daniel

danielkuhl Fri, 03/15/2013 - 06:07
User Badges:

Hi Sergey,


I build a little lisp lab for you which is similar to the real lisp project I am working for. Here are some short explanations:


DC: Represents some networks at the datacenter. These networks are the destinations for the trafic from the sites.

DCXTR: Lisp router for the datacenter with static routing to the datacenter networks 10.10.0.0/24 and 10.11.0.0/24

MRMS: Map-Resovler and Map-Server

Site1: 4 local networks and one management address configured as loopbacks will be propagated with lisp; ip sla with tracking to generate traffic to the datacenter


I skiped the GETVPN configuration and the redundant DC configuration to keep it simple. Hope it is ok in this way...

danielkuhl Fri, 03/15/2013 - 06:16
User Badges:

If there is someone interested I could add a GETVPN configuration to this small lab.

danielkuhl Mon, 03/18/2013 - 07:39
User Badges:

Hi Sergey,


I didn't try "lisp host mobility solution" yet, but I will go through the document this week and set up a test solution in GNS3.

Actions

This Discussion