Solved: [Cisco FAQ] - Do I load new CODE and LICENSES to the RFGW1?

mentrej · ‎07-09-2012

I would like to know where I can find the latest code

ronhanso · ‎07-10-2012

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page. Click "show FTP settings".

View solution in original post

ronhanso · ‎07-10-2012

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page. Click "show FTP settings".