×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VXC 6215 .ini files examples

Answered Question
Aug 13th, 2012
User Badges:

Hi guys,


Does anyone has some examples of .ini configuration files?. I'm trying to push some configuration to a  VXC 6215 via VXCM.

Also i need to override some old configurations that the thin client already has, is it possible?


Thanks


Christian Paz

Correct Answer by Jaime Valencia about 5 years 5 days ago

Reboot the client, and while it's booting, keep the G key pressed. You should see a green Cisco login screen


HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jaime Valencia Mon, 08/13/2012 - 17:37
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Cisco Virtualization Experience Client   configuration

http://www.cisco.com/en/US/docs/voice_ip_comm/vxc/english/vxc_6215_1-0/deploy/b_6215_fw8.6_deployment_guide_chapter_01_ps11976_TSD_Products_Installation_Guide_Chapter.html


As for the parameters:


Cisco Virtualization Experience Client 6215 INI Files  Reference Guide

http://www.cisco.com/en/US/docs/voice_ip_comm/vxc/english/vxc_6215_1-0/iniref/6215iniref.html


Once the client receives the new configs via a ini file the settings change accordingly, bear in mind that removing or not changing the same settings from the .ini file does not remove the old configurations unless you have preserve changes = no


ie

you had timezone in the .ini file with some value, if you remove the value from the .ini file, whatever you had before remains in the client config. Again, that unless you have preserve changes = no which basically means the client will get the config every single time it boots.


HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

ChristianPaz Tue, 08/14/2012 - 13:33
User Badges:

Hi, do you know any procedure to go back to factory defaults (a hardware procedure), because i've been changing some parameters in the .ini files and now i can't access to the virtual desktops.

In vmware view the probles is that i can't use the mouse on the virtual desktop.

In citrix the browser crashes before displaying the desktop.


Thanks

Correct Answer
Jaime Valencia Tue, 08/14/2012 - 17:03
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Reboot the client, and while it's booting, keep the G key pressed. You should see a green Cisco login screen


HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

Actions

This Discussion