×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to remove this entry

Answered Question
Aug 17th, 2012
User Badges:

Hi Guys,


Can someone please tell me the command to remove this config on my ASA below? The ASA is running version 8.4.


object netowork mail

   host 10.1.1.79


object network mail

   nat (inside, outside) static 1.1.1.1


Any help will be greatly appreciated


Thanks,

Lake

Correct Answer by varrao about 5 years 1 day ago

Hi Lakeram,


You would first need to get into  the config mode on the ASA and then try the following commands:


object network mail

    no nat (inside, outside) static 1.1.1.1

    exit


no object network mail



Thanks,
Varun Rao
Security Team,
Cisco TAC

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
varrao Fri, 08/17/2012 - 06:27
User Badges:
  • Red, 2250 points or more

Hi Lakeram,


You would first need to get into  the config mode on the ASA and then try the following commands:


object network mail

    no nat (inside, outside) static 1.1.1.1

    exit


no object network mail



Thanks,
Varun Rao
Security Team,
Cisco TAC

Lakeram Harrypersaud Fri, 08/17/2012 - 07:14
User Badges:

Hi Varun,


It's actually this command. I am very sorry for my mistake. Please tell me the command to remove these entries?


object service FTP

service tcp source eq ftp

object network obj_1.1.1.1

host 1.1.1.1

object network obj_10.11.1.5

host 10.11.1.5

object service FTP

service tcp source eq ftp

object network obj_1.1.1.1
host 1.1.1.1
object network obj_10.11.1.5
host 10.11.1.5


Thanks,

Lake

Actions

This Discussion