×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

remote access vpn authorization using Cisco ACS 5.3 and ASA 8.2

Unanswered Question
Aug 20th, 2012
User Badges:

Hi all,


we plan to use ACS 5.3 for remote vpn user authorization.

we have found a document on to how to do this, but they use ASA 8.3.

we would like to know if it is supported on ASA 8.2 or do we need to upgrade the ASA IOS.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Marcin Latosiewicz Mon, 08/20/2012 - 13:26
User Badges:
  • Cisco Employee,

What specific features were you interested in. Typical RADIUS authorization process didn't change much between ASA 8.2 and 8.3 (and 8.4 for that matter).


You can compare here:

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/access_aaa.html

http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/access_aaa.html


Unless you were looking for somethign very specific?

harinirina Mon, 08/20/2012 - 22:40
User Badges:

Hi,


yes,we plan to use RADIUS authorization.

Thanks a lot for your reply.

Actions

This Discussion

Related Content