×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco wireless EAP-TLS authentication issues

Unanswered Question
Aug 27th, 2012
User Badges:


Hi,

We have setup a new wireless environment and were looking at using EAP-TLS. This works ok, but no matter what we do it will never prompt for username and password credentials as well as the mutual certificate authentication. Is there a way that this can occur? We are using:

Cisco WLC 7.2

CISCO ACS 5.2

MICROSOFT SERVER 2008 AD infrastructure

Windows 7 PC


Any info or articles greatly appreciated


Kind regards


David

Sent from Cisco Technical Support iPad App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Mon, 08/27/2012 - 04:22
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

EAP TLS just uses a certificate on the client machine for authentication. Peap uses credentials for authentication. You can't use both.


Sent from Cisco Technical Support iPhone App

Amjad Abdullah Mon, 08/27/2012 - 05:12
User Badges:
  • Red, 2250 points or more

EAP-TLS does not prompt for credentials. It uses the clients certificates to provide client's identity.

You need to read EAP-TLS deployment guide, it is interesting and useful: http://tiny.cc/l27ojw


HTH


Amjad


You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

Actions

This Discussion