×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

display N7K and switch 4507 module in the LMS 4.1

Unanswered Question
Aug 27th, 2012
User Badges:

i have two  cisco Nexus7000 C7009 (9 Slot) Chassis ("Supervisor module-1X")

  Intel(R) Xeon(R) CPU         with 8251592 kB of memory.


, two switches 4507 with supervisor 848GBPS

each switches 4507 have four modules


and switches 2960



1- 4500  6 ports 10 GE (X2) module .

2-4500 48 ports 10/100/100 RJ-45 module .

3-4500 12 ports GE(SFP) module .

4- 4500 12 port 10 GE ( SFP) module .



i configured the snmp in the 4500  and 2960 switches as the below


snmp-server community test RO
snmp-server community puplic RW
snmp-server enable traps
snmp-server host 10.1.1.10 traps test

snmp-server trap-source Vlan91

logging on

logging host 10.1.1.10

logging trap alerts

logging source-interface Vlan91

ip http secure-server

ip http authentication local

username admin privillage 15 password Aadmin123

enable secret aggn

line vty 5 15

transport input ssh

login local


also i configured the SNMP in the N7K switches as the below


snmp-server community test group network-admin

snmp-server community puplic group network-operator

snmp-server host 10.1.1.10 version v2 test

username admin password Aadmin123 role network-admin



the server lms 4.1 can display switches 2960 in the cisco view .

aslo LMS display switches 4500 with module 1,2 and supervisor but can not display module 3 and 4 for switches 4500 .

the LMS also can not disply N7K in the cisco view .


i need steps for the LMS to display switches 4500 and N7K  in the cisco view.


regards ,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content