cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7085
Views
5
Helpful
4
Replies

WS-C3560E - IOS 15.0(2)SE ->AUTHMGR-4-UNAUTH_MOVE

torleif
Level 1
Level 1

I have upgraded the IOS on our WS-C3560E to versjon IOS 15.0(2)SE.

Ports GI0/36 and Gi0/37 are connected to a 1712 router.

After the IOS upgrade of the 3560 I keep getting errormessages:

    03:24:34: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.9269.05e3) from Gi0/36 to Gi0/37

I found info on the errormessage:

     Error Message    AUTHMGR-4-UNAUTH_MOVE, MSGDEF_LIMIT_MEDIUM: [chars] MAC address 
     ([enet]) from [chars] to [chars]

          Explanation    There was an authenticated move on the old IDB. The first [chars] is slow or fast, the second [chars] is the source interface name, the third [chars] is the destination interface name, and [enet] is the MAC address.

          Recommended Action    No action is required.

If no action is required, how do I get rid of the error message? It keeps comming all the time...

Regards,

Torleif

4 Replies 4

jmglass
Level 1
Level 1

Hi Torleif,

Did you ever have any luck getting rid of these messages?

I just upgraded a WS-C2960S to version 15.0(2)SE and have started logging the same messages.

Searching and only found what you show above, "No action is required" but I would like to get these under control. :-)

Have multiple VLANs off C2960S to 6509 and logging many messages. Might go back to 15.0(1)SE3 just to stop these.

thanks!

jim

Nov 19 07:57:48.441 EST: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (000f.35df.2400) from Gi1/0/48 to Gi1/0/45

Nov 19 07:57:53.480 EST: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (000f.35df.2400) from Gi1/0/45 to Gi1/0/47

Nov 19 07:57:58.592 EST: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (000f.35df.2400) from Gi1/0/45 to Gi1/0/47

Nov 19 07:58:03.667 EST: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (000f.35df.2400) from Gi1/0/45 to Gi1/0/48

Nov 19 07:58:08.701 EST: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (000f.35df.2400) from Gi1/0/45 to Gi1/0/47

Nov 19 07:58:13.750 EST: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (000f.35df.2400) from Gi1/0/47 to Gi1/0/45

Nov 19 07:58:18.752 EST: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (000f.35df.2400) from Gi1/0/45 to Gi1/0/47

Hi Jim,

I was not able to get rid of the messages...

Regards,

Torleif

FYI,

Looks like a bug, doing  'no authentication mac-move'  is work around to stop the messages.

best!

jim

Hafed Ait Elhaj
Cisco Employee
Cisco Employee
"AUTHMGR-4-UNAUTH_MOVE" messages are generally seen when same mac address being present on 2 interfaces. Depending on the movement/succession of the MAC address it will be categories as slow/fast. Configuring 'no authentication mac-move permit' should stop the messages.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: