ASA 5505 - dual wan: wan1 for vpn l2l-wan2 for everything else

Unanswered Question
Sep 3rd, 2012
User Badges:

Hi to all.

My goal is to use dual wan (with 2 different ISP):

I would use:

wan1 for all: web, mail, ecc

wan2 only for a vpn l2l connection with HQ (voip, intranet).

Obviously the wans have to work at the same time.

It's possible with asa 5505? (without a router).

Do yuo know some tutorial for that?

Thank you.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Julio Carvajal Mon, 09/03/2012 - 09:51
User Badges:
  • Purple, 4500 points or more

Hello Paolo,

It will work as you will specify 2 different destinations on the routing table of the ASA.

It's going to be as simple as that,

Set the 2 interface, configured the proper NAT for those 2 interfaces, set the routes and finally the crypto map on the Wan2.



Remember to rate all the helpful posts, that is as important as a thanks.


This Discussion