ASR 1004 - Portchannel - Service policy not supported

Unanswered Question
Sep 12th, 2012


I cannot configure service policy on a Layer 3 portchannel on ASR 1004 with Cisco IOS XE 3.5.1, in which is supposed to be supported. This the information that i had:

access-list 1 permit ip any host xxxx time-range LAN-time


class-map match-any CLASS

match access-group 1


policy-map MAP

class CLASS

  shape average 71680000


interface Port-channel1

ip address xxxx

no ip redirects

no ip proxy-arp

ip flow ingress

standby 85 ip xxxx

standby 85 priority 150

standby 85 preempt

load-interval 30

no negotiation auto



(config)#interface Port-channel1

(config-if)#service-policy output MAP

service-policy output Inside-SHAPE-map not supported on this target

#sh ver

Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(1)S1, RELEASE SOFTWARE (fc2)

Technical Support:

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Wed 15-Feb-12 21:54 by mcpre

System image file is "bootflash:/asr1000rp2-advipservicesk9.03.05.01.S.152-1.S1.bin"

thank you very much for the assistance in advance!



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion

Related Content