CRS. Bootflash defragmentation

Unanswered Question
Oct 9th, 2012

Hi,

I have to do a bootflash defragmentation on CRS-3. I already have a procedure but I have a question about the FP-140 cards. As I could see the RP, MSC and FP40 have a bootflash, but I´m not sure if FP-140 has a bootflash.

I ask this because when I apply the show command to check fragmentation state in each FP140 card I get the following error:

0/0/CPU0        FP-140G              14-10GbE         IOS XR RUN      PWR,NSHUT,MON

RP/0/RP0/CPU0:CRS#show filesystem bootflash: filesys location 0/0/CPU0 | include Stale

Mon Oct  1 16:56:10.115 SCHILE

Unable to open file : No such file or directory

But when I apply the command to another type of card I can see the % of fragmentation:

0/2/CPU0        MSC                  8-10GbE          IOS XR RUN      PWR,NSHUT,MON

RP/0/RP0/CPU0:STGO-LACI-P1#show filesystem bootflash: filesys location 0/2/CPU0 | include Stale

Mon Oct  1 16:56:29.454 SCHILE

  Stale     :    25896652 Bytes   41%

I hope that somebody could help me.

Thanks,

Jaime.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
smilstea Wed, 10/10/2012 - 13:54

Hi Jaime,

Every SP node has a bootflash.

I would recommend using the show filesystem bootflash: all location 0/0/CPU0 command from admin mode in order to see all the information

Regards,

Sam

nifevrie Mon, 10/15/2012 - 00:26

Hi Jaime, Sam,

no more SP in the CRS-3 line cards (FP140...), all the environmental monitoring is done by an embedded board now.

The bootflash has been replaced by a eUSB of 4GB in the card (lcdisk0: and lcdisk0a:). You don't need to defrag it.

Cheers,

N.

Actions

Login or Register to take actions

This Discussion

Posted October 9, 2012 at 7:53 AM
Stats:
Replies:2 Avg. Rating:
Views:525 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard