×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Directly Dialing a Phone's Speakerphone/Intercom

Unanswered Question
Nov 16th, 2012
User Badges:

We have a client that is requesting to be able to dial directly to the speakerphone (intercom) of another phone. We know that we can configure an intercom button on the phones to do that, but if there are 20 phones in the office, the receptionist would have to have an additional 20 buttons just for that purpose. Is there a key combination that can be pressed before dialing the extension that will do the same thing? Ex: 6101 would automatically go to the voicemail of extension 101.

We currently use CCA and CME. Yep, UC5xx. Phones are SPA509G. I can dial directly to voicemail, but my question is regarding dialing directly to speakerphone/intercom. Does this help clear things up?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 11/16/2012 - 12:07
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You will need to configure additional ephone-dn (these can be single line), configured as intercom, You can assign these as overlay to the main DN.


Note: I have no idea if that is possible with CCA. No issue with CLI.

muireadhachhagan Tue, 11/27/2012 - 07:18
User Badges:

In CCA, setup an extension as a Dialable Intercom on each phone and it will work.

paolo bevilacqua Tue, 11/27/2012 - 07:26
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Check "configuring Intercom" chapter in CME administrator guide.

Actions

This Discussion