cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1918
Views
0
Helpful
5
Replies

WAP4410N 802.1x dynamic VLAN assignment?

Boudewijn Plomp
Level 1
Level 1

Hi,

Does the WAP4410N support Dynamic VLAN assignment by means of 802.1x authentication?

The reason why I ask this; I am able to configure a SSID on a WAP4410N with WPA2-Enterprise, in combination with 802.1x PEAP network authentication. I can succesfully connect Windows, Windows RT, Windows Phone, iOS and Android devices. But.. I am unable to designate them to another VLAN based on access/connection policies. For example; I want mobile devices such as iPhone and Windows Phone to be assigned to a specific VLAN. The Wireless Access Point (authenticator) must be able to support that.

This is my setup:

Spplicants: Windows 8 / iPad / ...

Authenticator: WAP4410N

Authentication Server: Microsoft NPS (Network Policy Server)

I used 802.1x PEAP (Protected EAP) with password (domain user) authentication. In fact, the suplicants communicate with 802.1x to the authenticator. The authenticator communicates with RADIUS to the authentication server. NAP is not in between. It's just plain 802.1x authentication.

Any suggestions or do you know wether dynamic VLAN assignment is supported?

3 Accepted Solutions

Accepted Solutions

Tom Watts
VIP Alumni
VIP Alumni

Hi Boudewijn, as far as I know, DVA is not supported on this device. The SSID is manually configured with the PVID and there isn't an option within the 802.1x to set any DVA activation.

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

View solution in original post

Hi Boudewijn, currently none of the SB AP support DVA.

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

View solution in original post

Correct, none of the SB devices support DVA except for the SX300 and SX500 switches.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

View solution in original post

5 Replies 5

Tom Watts
VIP Alumni
VIP Alumni

Hi Boudewijn, as far as I know, DVA is not supported on this device. The SSID is manually configured with the PVID and there isn't an option within the 802.1x to set any DVA activation.

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

That is what I was afraid of. Is there another Small Medium Business model which does?

Hi Boudewijn, currently none of the SB AP support DVA.

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

Thanks you Tom!

Just to make sure, to confirm. I am now working for a customer who has serveral of the following wireless access points.

  • Cisco WRV210
  • Cisco RV120W

They need to support DVA (Dynamic VLAN Assignment). They do not suport that either?

Correct, none of the SB devices support DVA except for the SX300 and SX500 switches.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: