×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

upgrade ACS 5.3 to 5.4 fails

Answered Question
Dec 7th, 2012
User Badges:

Hello,

I try  upgrade ACS 5.3.0.40 to new version 5.4.0.46. Everything looks ok:


ACS-machine/acsadmin# application upgrade ACS_5.4.0.46.tar.gz rep01

Do you want to save the current configuration ? (yes/no) [yes] ?

Generating configuration...

Saved the running configuration to startup successfully


% CARS Install application required post install reboot...


Broadcast message from root (pts/0) (Thu Dec  6 23:36:41 2012):


The system is going down for reboot NOW!


Application upgrade successful



But ACS machine (vmware instance) can't boot with this result: Volume group "smosvg" not found. (for details see attachment)


Any ideas?

--

martin

Attachment: 
Correct Answer by joopv about 4 years 8 months ago

Did you install patch 8 on the 5.3.0.40 before upgrading to 5.4?


Maybe you are running into CSCuc93106..


edit:

ehhmm .. unlikely.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
joopv Tue, 12/11/2012 - 05:17
User Badges:

Did you install patch 8 on the 5.3.0.40 before upgrading to 5.4?


Maybe you are running into CSCuc93106..


edit:

ehhmm .. unlikely.

Martin Kyrc Fri, 12/14/2012 - 01:36
User Badges:

joopv,

of course I have no patch installed! before upgrade to 5.4 is needed patch 6 or higher (patch 7, 8).

thanks.

--

martin

Martin Kyrc Mon, 01/07/2013 - 00:18
User Badges:

Hello joopv,

after successfully installing patch 8, upgrade to 5.4 has the same issue - kernel panic after reboot to 5.4. Any idea?

--

martin

Javier Henderson Wed, 01/29/2014 - 17:31
User Badges:
  • Cisco Employee,

Martin,


How much disk space did you allocate for ACS when you initially created the VM?


Javier Henderson

Cisco Systems

Martin Kyrc Thu, 01/30/2014 - 00:36
User Badges:

Javier,

it was long time ago, I can't remember. But I think, there was enough space (based on install/upgrade guide).


In the final, I exported configuration from version 8.3, then install fresh 8.4 and import saved configuration. I had two ACS boxes, therefore whole upgrade was without interuption 'radius services'.


martin

Actions

This Discussion

Related Content