×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SPA 300 and 500 series programming guides

Unanswered Question
Dec 11th, 2012
User Badges:

Hello all.


I am working a FreePBX system that implements Cisco SPA 300 series and 500 series solely. I have been trying to find more information regarding programming the line buttons for special features, like call pickup, and the lower 4 programmable buttons, but I can't seem to find any proper documentation. Any help would be greatly appreciated.


Also if anyone has experience with provisioning these devices in a FreePBX environment I would love any and all pointers on that as well.


With regards,

A Hopeful PBX admin

Gunnar Ingi                   

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Patrick Born Tue, 12/11/2012 - 07:48
User Badges:
  • Cisco Employee,

Hi Gunnar,


Although not specific to FreePBX, this document map may help you.

There is a lot of information specific to FreePBX out on the Internet. When searching, keep in mind that FreePBX is based on Asterisk and that the SPA5xx and SPA3xx IP phones are children of the SPA9xx phones so you may find more help by searching using the SPA942 as a model number, for example.


Regards,



Patrick

----------

Actions

This Discussion

Related Content