01-29-2013 10:44 PM - edited 03-07-2019 11:24 AM
Hi People,
I have purchased a new WiSM 2 and my catalyst 6509-E is failing to detect it. Here are the details of the switch:
1. supervisor engine: vs-s720-10g-3cxl
2. ios image: s72033-advipservicesk9_wan-mz.122-33.SXI10.bin
3.
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 8 Intrusion Detection System WS-SVC-IDSM-2 SAD103501HP
2 4 FRU type (0x6003, 0x3B2(946)) WS-SVC-WISM2-K9 SAL1648T81L
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL1438TRNP
8 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL1441W4T2
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0019.2fa7.2d3a to 0019.2fa7.2d41 6.2 7.2(1) 6.0(1)E1 Ok
2 f0f7.5569.19a0 to f0f7.5569.19af 1.1 Unknown Unknown PwrDown
5 0026.cb61.9438 to 0026.cb61.943f 3.2 8.5(4) 12.2(33)SXI1 Ok
8 1cdf.0fb3.ca20 to 1cdf.0fb3.ca4f 2.4 12.2(18r)S1 12.2(33)SXI1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 IDS 2 accelerator board WS-SVC-IDSUPG ADBG6260031 2.5 Ok
5 Policy Feature Card 3 VS-F6K-PFC3CXL SAL1441W2NZ 1.2 Ok
5 MSFC3 Daughterboard VS-F6K-MSFC3 SAL1443XXF9 5.1 Ok
8 Centralized Forwarding Card WS-F6700-CFC SAL1442WLLW 4.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Not Applicable
5 Pass
8 Pass
thanks.
ronnie
Solved! Go to Solution.
01-30-2013 12:08 AM
Upgrade the IOS to 12.2(33)SXJ or higher.
01-30-2013 12:08 AM
Upgrade the IOS to 12.2(33)SXJ or higher.
02-04-2013 10:59 PM
IOS upgrade solved the problem. thanks.
04-23-2014 11:22 PM
Dear Andras
Thank you very much
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: