UC560 with SPA525G2

riji · ‎01-31-2013

Hi All,

I've read from below UC500 Tele work best practice, and it said UC560 has some issue for phone VPN connection directly to it.

Has anyone tried setting up UC560 with SPA525G2 recently? I wanted to find out if this has been fixed. Or, is there any guidance for configuration if we do need to use an ASA.

https://supportforums.cisco.com/docs/DOC-22991

Thanks

Rick

Alexander Maroukian · ‎01-31-2013

Hi Rick,

The issue has been resolved in the latest software pack 8.6.1.

Please take a look at the following link:

https://supportforums.cisco.com/docs/DOC-27771

2. Key Bug Fixes:

CSCtw58664 - SSL VPN for SCCP causes crash while clearing WebVpn session

CSCtt19900 - Packet decryption fails at crypto HW engine for SSL VPN traffic with dtls

CSCtx59445 - MWI unsolicited mode fails with line key monitoring a floating extension

CSCtr07804 - UC560 CUE database corruption or crash due to high disk space usage

CSCtz08776 - CUE reports all channel resources used, not allowing calls

CSCts64962 - CUE IMAP - saved message count is negative. MWI always on

For detailed list of fixes and known caveats see Release Notes.

HTH,

Alex

*Please rate helpful pots