Buy or Renew
Buy or Renew
Cisco Virtual Engineer generative AI bot now active in Wireless Discussion Forum. Learn more.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
720
Views
0
Helpful
7
Replies

Cisco 2700 Wireless Location Appliance

ross_rulz
Level 1
Level 1

‎02-13-2013 05:52 PM - edited ‎07-03-2021 11:31 PM

Hi Guys,

We plan on buying a Cisco 2700 wireless location appliance but I need to know if it will be compatible with our 2500 WLC.

I've tried to look but cant find any document for this. Also can you deploy the location appliance without a WCS?

Thanks,

Ross.

Labels:
0 Helpful
7 Replies 7

Scott Fella
Hall of Fame
Hall of Fame

‎02-13-2013 05:55 PM

Here is the matrix. You will need to look
at the code you are running in the WLC.

The 2700 is also EOS.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
0 Helpful

Scott Fella
Hall of Fame
Hall of Fame

‎02-13-2013 05:56 PM

Here is the direct link

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp106063

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
0 Helpful

ross_rulz
Level 1
Level 1
In response to Scott Fella

‎02-13-2013 05:59 PM

So it's by software version on the WLC and not the hardware?

0 Helpful

Scott Fella
Hall of Fame
Hall of Fame
In response to ross_rulz

‎02-13-2013 06:02 PM

Yes... So the last supported WLC code for the 2700 is 6.0.202.0 and the 2504 required 7.x or newer. So that will not work.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
0 Helpful

ross_rulz
Level 1
Level 1
In response to Scott Fella

‎02-13-2013 06:07 PM

So the 2710 is the replacement for the 2700. So if you have a controller on 7.0 that means you can use the location appliance. Are there anyother work arounds to get location services working?

0 Helpful

Scott Fella
Hall of Fame
Hall of Fame

‎02-13-2013 06:10 PM

You need the MSE not the 2710.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
0 Helpful

Scott Fella
Hall of Fame
Hall of Fame

‎02-13-2013 06:15 PM

Here is the product guide

http://www.cisco.com/en/US/products/ps9742/index.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card