×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SPA3102 as simple FXO/SIP gateway, no router?

Answered Question

Hi,

 

Has anyone set up a SPA3102 as a simple gateway between the FXO PSTN line and an internal SIP PBX (Asterisk or similar)?  I don't want the thing trying to act as a router; it will be on the same LAN segment & subnet as the PBX machine and just needs to provide a 2-way SIP trunk that's actually the PSTN line.

 

Would this work with just the WAN port connected, or perhaps with both ports on the same segment & subnet, or would that confuse it?

 

Thanks!

 

Jeff

Correct Answer by Patrick Born about 4 years 6 months ago

Hi Jeff,


You could deploy it in bridge mode if you don't want it acting like a router:

    Router tab > Lan Setup > Networking Service > Bridge


Regards,



Patrick---

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (1 ratings)
Loading.
Correct Answer
Patrick Born Mon, 02/18/2013 - 14:55
User Badges:
  • Cisco Employee,

Hi Jeff,


You could deploy it in bridge mode if you don't want it acting like a router:

    Router tab > Lan Setup > Networking Service > Bridge


Regards,



Patrick---

Actions

This Discussion