×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Can't dial internally to A pot phone connected to SPA8800

Unanswered Question
Feb 21st, 2013
User Badges:

                   Hi,


I am trying to set up the basics on the 8800 on our UC540, I can call the pot phone from my desk phone, but not vice versa.Any ideas?


Thanks,

Nathan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Mowery Mon, 02/25/2013 - 13:05
User Badges:

Do you want the analog phone to be able to call any phones?  Or do you only want to block calling to the one IP phone?

Nathan Welsby Tue, 02/26/2013 - 00:17
User Badges:

Basically, our customer wants to have 3 internal bells on site, so I am testing the 8800 in the lab, and we can't call the pot phone from the IP phone. When I make an internal call from the pot phone it displays on the IP as the correct extension number. I don't understand why it works one way but not the other? Our system is on the latest software level.

Nathan Welsby Tue, 02/26/2013 - 07:20
User Badges:

Everytime I try and add the SPA8800 to the FXS Gateway, it says "configured Sucsessfully" then when i refresh it dissapears?

Nathan Welsby Thu, 02/28/2013 - 04:00
User Badges:

I have the 8800 working correctly now. I had to do a "route add" for the CUE via command line. This allowed me to add the 8800 to the FXS Gateway.