cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
11894
Views
10
Helpful
4
Replies

VPN client internal error 2738

jmp780718
Level 1
Level 1


Hi.

I'm having internal error 2738 on unstall. How to solve the error?

Ghana you.
Sent from Cisco Technical Support iPad App

1 Accepted Solution

Accepted Solutions

Thats Nice.

Have a Nice Day

*** Rate Helful Posts***

Jawad

View solution in original post

4 Replies 4

jawad-mukhtar
Level 4
Level 4

When you attempt to install Cisco VPN client in Windows Vista or Windows 7, you receive the following error:

Internal Error 2738

This error prevents Cisco VPN client from instlaling properly.

Solutions

There are two steps to the following solution. If the first

To resolve this error, do the following:

  1. Make sure the Cisco VPN client installer is closed before you begin.
  2. Click Start > All Programs > Accessories
  3. Right-click on Command Prompt in the Accessories section of the Start Menu and select Run as Administrator.
  4. Type cd C:\Windows\System32 and then press Enter.
  5. Type regsvr32 C:\Windows\System32\vbscript.dll and then press Enter.
  6. You will receive a message that says, "DLLRegisterServer in C:\Windows\System32\vbscript.dll succeeded." Click OK.
  7. Keep the command prompt window open for now.     
    • You  can close this window once you're able to install Cisco VPN client. If  the steps above did not resolve the error, you will use the command  prompt window in the instructions below.

You should now attempt to install Cisco VPN client. If you get the same error as before, proceed with the instructions below.

Step 2

Important: These  instructions require you to edit the registry, which is a potentially  dangerous task. Do not follow these instructions unless you are  confident that you know what you're doing. It is recommended that you  make a registry backup prior to editing the registry. Refer to 1115: Backing up and restoring registry keys in Windows.

  1. Click Start and type regedit in the box.
  2. Browse to the following location: HKEY_CURRENT_USER\SOFTWARE\Classes\CLSID\
  3. Locate and delete the registry key named {B54F3741-5B07-11CF-A4B0-00AA004A55E8}.     
    • We recommend making a backup of this registry key before deleting it.
  4. Close the registry editor.
  5. Go back to the command prompt window you used in the instructions above.     
    • If you closed this window, follow steps 1 - 4 above to open the command prompt window using the Run as Administrator option and navigate to the C:\Windows\System32 directory.
  6. Within the C:\Windows\System32 directory, type regsvr32 C:\Windows\System32\vbscript.dll and then press Enter.
  7. You will receive a message that says, "DLLRegisterServer in C:\Windows\System32\vbscript.dll succeeded." Click OK.
  8. Close the command prompt window.

You can now install Cisco VPN client.

Jawad

Nice write-up, 5 stars! Thanks for sharing

Michael Please rate all helpful posts

jmp780718
Level 1
Level 1

Thanks the second Step works for me


Sent from Cisco Technical Support Android App

Thats Nice.

Have a Nice Day

*** Rate Helful Posts***

Jawad
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: