×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Problems with SPA 3102 - Incomming Calls

Unanswered Question
Feb 26th, 2013
User Badges:

I have posted this in another forum - Im from Australia

 

http://www.austech.info/voip/81148-spa-3102-first-incoming-call-wont-connet-blank-have-call-twice-connect.html

 

You can call out etc etc.. but having trouble with the incomming call. You can call into the line/phone (externally), the internal phone (DECT) will ring, caller ID will display but when you answer the call it is blank (no noise at all, not even static at both ends).  If you call back in it will answer and all is working.

 

Any suggestions with settings, is it a connection delay setting? It seams the ATA needs to be triggered first then its ready to answer as there is also a long pause between finishing the number when calling out and the actial connection. There isnt a problem with the ISP or line etc as it has been working, it with the products/settings.

 

Any help would be great. Thanky you in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Wed, 02/27/2013 - 03:48
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Wrong forum, post in "small business voice - SPA phones". You can move your post using the actions panel on the right.

duke55555 Wed, 02/27/2013 - 13:36
User Badges:

Thanks, will move it.


Anyone? Im really stuck.

Actions

This Discussion