Multiple outgoing CID with SIP trunk?

Unanswered Question
Apr 26th, 2013
User Badges:

We're using Broadvox (working great) for our SIP trunk on a UC540.


Would there be a way to have two separate outgoing caller ID's?  It looks like the UC540 only has a single spot to enter a caller ID.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
paolo bevilacqua Sat, 04/27/2013 - 16:38
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You can configure on a per-extension basis, eg, some phones send a calling number, others another, etc.


Note I don't know if and how that can be done with CCA. It can surely be done with CLI.

JOHN THIEN Wed, 05/01/2013 - 12:32
User Badges:

With your encouragement, I found where it is done in CCA.  It is in one of the tabs in the outgoing dial plan.  You can select an extension and then provide a new outgoing CID.  Thank you!

paolo bevilacqua Wed, 05/01/2013 - 15:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Thank you for the nice rating and good luck!

Actions

This Discussion