06-27-2013 04:27 PM - edited 02-21-2020 06:59 PM
hi , i have cisco asa 5520 8.2 with any connect clients authentication through ACS connected to AD, i have new requirements to create new tunnel group and new group policy so that i can apply specfic policy on one user. how i can associate the new user (AD) to specfic tunnel group
06-28-2013 01:16 AM
3 possibilities:
- Enable tunnel selection
- Assign a secific link to the group
- Certificate based selecetion
Michael
Please rate all helpful posts
06-29-2013 06:48 AM
hi, can you plz specfiy more
thanks
06-29-2013 11:44 AM
When using ASDM you can check "Enable Tunnel Group Selection" on the AnyConnect Main Page.
Or via Group Policy you can specify, when your ASA is reachable via vpn.test.com, then you set to group "sales" the link "vpn.test.com/sales". So when you set in AnyConnect the link vpn.test.com/sales the correct group will be chosen.
Michael
Please rate all helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide