×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

QuickVPN at RV110W Wireless-N VPN Firewall

Unanswered Question
Jun 30th, 2013
User Badges:

Good day,

I try enable VPN remote access from internet trougth RV110W Wireless-N VPN FIREWALL with any result. Please revise my error.



Pertinent information RV110W:


WAN Server Address = 200.124.243.172

LAN Server Address = 192.168.8.111

Routing Operating Mode = Gateway

VPN Client Setting Table = Username Protocol QuickVPN


cert.pem copied into VPN CLIENT Folder


Log QuickVPN Client


2013/06/30 20:52:45 [STATUS]OS Version: Unknown

2013/06/30 20:52:45 [STATUS]One network interface detected with IP address 10.10.10.13

2013/06/30 20:52:45 [STATUS]Connecting...

2013/06/30 20:52:45 [DEBUG]Input VPN Server Address = 200.124.243.172

2013/06/30 20:52:45 [STATUS]Connecting to remote gateway with IP address: 200.124.243.172

2013/06/30 20:52:46 [STATUS]Remote gateway was reached by https ...

2013/06/30 20:52:46 [STATUS]Provisioning...

2013/06/30 20:52:49 [STATUS]Success to connect.

2013/06/30 20:52:49 [STATUS]Tunnel is configured. Ping test is about to start.

2013/06/30 20:52:49 [STATUS]Verifying Network...

2013/06/30 20:52:55 [WARNING]Failed to ping remote VPN Router!

2013/06/30 20:52:58 [WARNING]Failed to ping remote VPN Router!

2013/06/30 20:53:01 [WARNING]Failed to ping remote VPN Router!

2013/06/30 20:53:04 [WARNING]Failed to ping remote VPN Router!

2013/06/30 20:53:07 [WARNING]Failed to ping remote VPN Router!



********

The remote gateway in not responding. Do you want to wait?

********



2013/06/30 20:53:10 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.

2013/06/30 20:53:56 [STATUS]Disconnecting...

2013/06/30 20:54:00 [STATUS]Success to disconnect.


Thanks for your time,

Juan L. Mera

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion