cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
699
Views
4
Helpful
1
Replies

Ad Hoc conference dose not work

Roger Jin
Level 1
Level 1

I got an simple single cluster CUCM 9.1 up running

All the ip phones are in one same site and using G711 codec

The problem is the ad hoc conference stops working which did worked before.
The issue is when i am trying to press the conference button at the second time for creating the 3rd parties ad hoc conference, the calls are just disconnected. All three parties are lost connection.

However the meet me conference is still working fine.

The CUCM only has default software conference bridge configured and the status of the conf bridge is registered.

I have tried restarted the conf bridge and the ip streaming app service, didn't fix.

The only thing i can think which may relate to this issue is we recently installed a call recording server and programmed a sip trunk in the CUCM back to the call recoring server and applied call recording profile for every ip phones. I don't know if this change will effect the ad hoc conference.

Any suggestion?

1 Reply 1

Jaime Valencia
Cisco Employee
Cisco Employee

Have you disabled G722??

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: