Solved: Need advice for Profile 55 Dual with c60

Syahrir Mohamed Yatim · ‎07-03-2013

Hi

I have a few question regarding Profile 55 Dual with C60,SKU: CTS-P55DC60-K9.

1. What kind of microphone that is shipped with CTS-P55DC60-K9.

AT841UG:CTS-‐MIC-‐OMNIDIR= OR CTS-‐QSC20-‐MIC=

According to Reference 1 , the recommended microphone is AT841UG, CTS-‐MIC-‐OMNIDIR=

But on reference 2 page 11 pic, the picture shows microphone similar to TPM20, CTS-‐QSC20-‐MIC=

Reference 1: https://communities.cisco.com/docs/DOC-30323

Reference 2, page 11: http://www.cisco.com/en/US/docs/telepresence/endpoint/profile-series/tc5/administration_guide/profile_c60-c40_and_codec_c60-c40_administrator_guide_tc50.pdf

2. Can you help list all cables provided (including length)? Are VGA Cables provided?

Thank you in advanced for your help

Paulo Souza · ‎07-03-2013

Hi,

C60 codec uses the microphone CTS-MIC-OMNIDIR (AT841UG). The reference 2 show the other microphone because this administrator guide is to C40 and C60, that's why you found a picture, because C40 can use the microphone TPM20.

Please, consider the following document:

https://communities.cisco.com/docs/DOC-30323

I hope this help.

Paulo Souza

Please rate replies and mark question as "answered" if applicable.

Paulo Souza Was my response helpful? Please rate useful replies and remember to mark any solved questions as "answered".

View solution in original post

Dharmesh Nandoria · ‎07-03-2013

Hi yatim,

With profile having C 60 codec omni directional mic is shipped .

CTS-MIC-OMNIDIR= Omni Directional Microphone (AT841UG) - includes 7.5m cable

presentation cable :

CAB-VGA-DVI-AUD= included Presentation cable w/audio, 6 meters

(VGA-M w/3.5mm stereo male to DVI-M w/RCAx2 male)

Other cables like camera contorl , Display connectivity , Audio and DNAM ate already installed in cabinet .

HTH

Kind regards,

Dharmmesh

View solution in original post

Dharmesh Nandoria · ‎07-03-2013

Hi Syahrir,

Yes , It will come with all required cables

Kind regards,

Dharmmesh

Please rate replies and mark question as "answered" if applicable.

View solution in original post

Paulo Souza · ‎07-03-2013

Hi,

C60 codec uses the microphone CTS-MIC-OMNIDIR (AT841UG). The reference 2 show the other microphone because this administrator guide is to C40 and C60, that's why you found a picture, because C40 can use the microphone TPM20.

Please, consider the following document:

https://communities.cisco.com/docs/DOC-30323

I hope this help.

Paulo Souza

Please rate replies and mark question as "answered" if applicable.

Paulo Souza Was my response helpful? Please rate useful replies and remember to mark any solved questions as "answered".

Dharmesh Nandoria · ‎07-03-2013

Hi yatim,

With profile having C 60 codec omni directional mic is shipped .

CTS-MIC-OMNIDIR= Omni Directional Microphone (AT841UG) - includes 7.5m cable

presentation cable :

CAB-VGA-DVI-AUD= included Presentation cable w/audio, 6 meters

(VGA-M w/3.5mm stereo male to DVI-M w/RCAx2 male)

Other cables like camera contorl , Display connectivity , Audio and DNAM ate already installed in cabinet .

HTH

Kind regards,

Dharmmesh

Syahrir Mohamed Yatim · ‎07-03-2013

Hi Dharmesh,

Just need some clarification

Is it safe to assume that Profile 55 dual w C 60 using the same item as C60 integrator package

Integrator package C60

1) Codec C60

2) PrecisionHD 1080p12x camera

3) Accessories:

• Omni directional microphone with cable

• Camera control cable, 5m / 16ft

• PC presentation cable, 6m / 20ft

• HDMI cable, 5m / 16ft (camera)

• HDMI cable, 3m / 10ft (monitor)

• Ethernet cable, 5m / 16ft

• 12V power supply for camera

• Power cables

• Remote control with batteries

• Rack mounting kit

• Installation sheet

Best regards

Syahrir

.

Dharmesh Nandoria · ‎07-03-2013

Hi Syahrir,

Yes , It will come with all required cables

Kind regards,

Dharmmesh

Please rate replies and mark question as "answered" if applicable.