windows 2008 on UCS 220 M3

Answered Question
Jul 4th, 2013
User Badges:

Hi ,


We are trying to install windows 2008 on UCS 220 M3 , and we do not see any harddisk to install..


How can achieve this ?


Reagards,


Purna

Correct Answer by Anas Abueideh about 4 years 1 month ago

Hi Purna,


you need to configure the RAID to see the HDD. you need to enter the CIMC and web bios to acheive that


HTH

Anas


please rate all helpful posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (4 ratings)
Loading.
Correct Answer
Anas Abueideh Thu, 07/04/2013 - 13:29
User Badges:
  • Blue, 1500 points or more
  • Community Spotlight Award,

    Best Doc/Video: December 2014

Hi Purna,


you need to configure the RAID to see the HDD. you need to enter the CIMC and web bios to acheive that


HTH

Anas


please rate all helpful posts

Purna Wijenayaka Fri, 07/05/2013 - 01:54
User Badges:

Hi ,


I have created the RAID , and downloaded the following and installed the windows 2008 on UCS 220 M3 ,


http://software.cisco.com/download/release.html?mdfid=284296253&softwareid=283853158&release=1.4%286d%29


the only problem now letf is the network driver is no there in the drivers ios..all other drivers are there....


anyway that we can get the network driver for windows 2008 on UCS 220 M3 ?


Thanks

Purna

Correct Answer
Anas Abueideh Fri, 07/05/2013 - 02:30
User Badges:
  • Blue, 1500 points or more
  • Community Spotlight Award,

    Best Doc/Video: December 2014

Purna Wijenayaka Fri, 07/05/2013 - 05:59
User Badges:

Hi ,

Thanks for the info..we have removed the server,opened the cover ....checked for the Network chipset (intel i350 am2 )

and downloaded the windows 2008 driver from the intel site..it is working now..

thanks

for the support..

purna

Anas Abueideh Fri, 07/05/2013 - 08:49
User Badges:
  • Blue, 1500 points or more
  • Community Spotlight Award,

    Best Doc/Video: December 2014

Hi Purna,


it is a good news that you get your server work.

thanks for the rating


regards

Anas

Actions

This Discussion