×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SPA122 is not registering after incoming call

Unanswered Question
Jul 5th, 2013
User Badges:

Good day,


I have SPA122 thats working good.


After incoming call it's loosing registration. After reboot starts to work normal. Where is a setting to renew registration automaticly?


Some other way to fix that problem?



SPA Info as follows:

Model:  SPA122, LAN, 2 FXS

Hardware Version: 1.0.0

Boot Version: 1.0.1

Firmware Version: 1.0.2 (006)


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
nseto Fri, 07/05/2013 - 10:31
User Badges:
  • Silver, 250 points or more

The latest sw version is 1.3.2.

Please try that, located at

http://software.cisco.com/download/release.html?mdfid=283998793&softwareid=282463187&release=1.3.2&relind=AVAILABLE&rellifecycle=&reltype=latest

If still a problem, we'd need to see the debug log to see why the re-registration isn't occuring.

Info on that at

https://supportforums.cisco.com/docs/DOC-9862

Actions

This Discussion